F 450 4WD Super Duty V10-6.8L VIN D (2004)
1. Lubricate the piston boot, caliper piston, piston seal and caliper bores with clean DOT 3 motor vehicle brake fluid.
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal. Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston.
Position the boot in the bore, and press the caliper piston into the bore.
5
Install the piston boot retainer.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal and Installation
NOTE: Excursion, F-250 and F-350 shown, F-450, F-550 similar.
1. Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
