F 450 4WD Super Duty V10-6.8L VIN D (2004)
Parking Brake Shoe: Service and Repair
Shoes-Rear Wheel
Special Tools And Equipment
Special Tool(s)
Removal
WARNING: Asbestos fiber dust can be present on brake and clutch assemblies and is hazardous if inhaled. Brake and clutch assemblies
must be cleaned using a vacuum cleaner recommended for use with asbestos fibers such as a brake/clutch/service vacuum. The bag must be
labeled per OSHA instruction, sealed, and the trash hauler notified as to the bag's contents. If a vacuum suitable for asbestos is not available,
cleaning must be done wet. If dust generation is still possible, technicians must wear government-approved toxic dust purifying respirators.
WARNING: Occupational Health And Safety Act (OSHA) requires areas where asbestos dust generation is possible to be isolated and
posted with warning signs. Only technicians performing brake or clutch repair are to be present in the area.
1. Remove the rear disc brake rotor.
2. Disconnect the rear parking brake cable at the parking brake intermediate cable.
3. Disconnect the parking brake cable at the parking brake lever.
