F 450 4WD Super Duty V10-6.8L VIN D (2004)
Crankshaft Gear/Sprocket: Specifications
Engines equipped with bolt-on sprockets
Install the camshaft sprocket (2).
Install the bolt (1).
Tighten the bolt.
^
M10 bolt: Tighten in two stages.
^
Stage 1: Tighten to ............................................................................................................................................................. 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional ................................................................................................................................................................... 90°.
^
M12 bolt: Tighten to .............................................................................................................................................................. 120 Nm (90 ft. lbs.).