F 450 4WD Super Duty V10-6.8L VIN D (2004)
7. Remove the special tool from the engine.
8. Install the generator.
9. Install the fan shroud.
10. Install the throttle body adapter.
^
Position a new throttle body adapter gasket.
^
Position the throttle body adapter.
^
Install the four bolts and tighten in two stages:
^
Stage 1: Tighten to 9 Nm (80 inch lbs.).
^
Stage 2: Tighten an additional 90°.
11. Connect the heater hose.
12. Connect the idle air control motor electrical connector and the bypass hose.
