F 450 4WD Super Duty V10-6.8L VIN D (2004)
4. NOTE: Be sure to tighten the bolts in two stages.
Tighten the bolts in the sequence shown.
^
Stage 1: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 2: Tighten an additional 90°.
5. Attach the transmission cooling tube bracket and install the nut.
6. Lower the transmission.
7. Loosely install the transmission mount nuts.
8. Install the flywheel inspection plate.
9. Position the engine oil cooler adapter and install the bolt.
10. Install the oil bypass filter.