ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicle Lifting|Description and Operation|Page 3096 > < Full Floating Rear Axle-Dana|Page 3092
Page 1
background image

Vehicle Lifting: Description and Operation

JACKING

Jacking Points

WARNING:
-

If equipped, the electrical power to the air suspension system must be shut down prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located below the glove box in the lower right of the front
passenger footwell. Failure to do so may result in unexpected inflation or deflation of the air springs which may result in shifting of the
vehicle during these operations.

-

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.

-

Make sure the jack is correctly positioned to prevent the vehicle from falling.

-

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.

Refer to the Owner Guide for additional information on vehicle jacking.

LIFTING

Lifting Points

Frame - Front (right Side Shown)

Frame - Rear (right Side Shown)

Vehicle Lifting|Description and Operation|Page 3096 > < Full Floating Rear Axle-Dana|Page 3092