F 450 4WD Super Duty V10-6.8L VIN D (2004)
Oxygen Sensor: Service and Repair
HEATED OXYGEN SENSOR (HO2S)
Socket, Exhaust Gas Oxygen Sensor
SPECIAL TOOL(S)
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the heated oxygen sensor (HO2S) electrical connector.
3. NOTE: While removing the HO2S on a 6.8L engine, raise and support the vehicle.
Using the special tool, remove the HO2S.
INSTALLATION
1. To install, reverse the removal procedure.
