F 450 4WD Super Duty V10-6.8L VIN D (2004)
Throttle Cable/Linkage: Service and Repair
Accelerator Cable
CABLE - ACCELERATOR
REMOVAL
1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.
2. CAUTION: The air cleaner outlet tube must be securely sealed to prevent unmetered air from entering the engine.
Disconnect the air cleaner outlet tube from the throttle body.
3. Remove the accelerator control splash shield.
1
Release the tab.
2
Remove the splash shield.
