F 450 4WD Super Duty V10-6.8L VIN D (2004)
2. NOTE: The RCM is mounted on the center tunnel under the instrument panel.
Pull out to release the retaining clips and remove the restraint control module (RCM) cover.
3. Disconnect the restraint control module RCM.
1
Disconnect the RCM electrical connector locking clip.
2
Disconnect the RCM electrical connector.
3
Remove the RCM retaining screw.
4. Remove the RCM module.
1
Remove the RCM retaining screws.
2
Remove the RCM module.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
