F 450 4WD Super Duty V10-6.8L VIN D (2004)
1. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system
operation.
Position the RCM. Install the bolts.
2. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system
operation.
Connect the RCM.
1
Install the bolt.
2
Connect the RCM electrical connector.
3
Engage the RCM electrical connector locking clip.
3. Install the RCM cover.
4. Connect the battery ground cable.
5. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
6. Disconnect the battery ground cable and wait at least one minute.
7. Restore the vehicle to operating condition.
1
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
2
NOTE: When a new RCM is first installed in the vehicle, module configuration must be carried out. If the RCM is incorrectly configured,
erroneous DTC(s) will result.
