F 450 4WD Super Duty V10-6.8L VIN D (2004)
Please refer to the appropriate Component or System to determine location of the front air bag sensors.
The side air bag sensors are located at or near the base of the B-pillar.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
CrewCab vehicles
19. Install the B-pillar trim panel, the rear assist handle, and the front and rear door scuff plates.
20. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide cover.
Install the shoulder safety belt guide.
1
Position the B-pillar trim panel to the body and push in securing the retainers.
2
Position the shoulder safety belt guide to the height adjuster.
3
Install the nut.
4
Close the shoulder safety belt guide cover.
SuperCab vehicles
21. Install the door scuff plate.
Regular cab vehicles
22. Install the corner trim panel.
