F 450 4WD Super Duty V10-6.8L VIN D (2004)
5. NOTE: Do not reverse the bracket during installation.
Position the bracket as noted in removal. Install the screws.
6. NOTE: The inboard and outboard tower cap covers are not interchangeable. The outboard cover sits flat on the tower cap. The inboard cover
sticks out from the tower cap.
Install the four tower cap attachment screws. Install the inboard, outboard and front screw covers.
7. Install the seat backrest trim cover J-clips.
8. Install the seat backrest trim panel.
1
Position the seat backrest trim panel to the seat backrest and lift up, engaging the upper retaining clips.
