F 450 4WD Super Duty V10-6.8L VIN D (2004)
6. Remove the safety belt anchor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the safety belt anchor.
INSTALLATION
1. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
-
Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide.
To install, reverse the removal procedure.
