ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Switch|Locations|Page 2380 > < Air Bag Deactivation Switch|Locations|Page 2378
Page 1
background image

Air Bag Deactivation Switch: Service Precautions

WARNING:

-

To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.

The side air bag sensors are located at or near the base of the B-pillar.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).

-

To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the supplemental restraint
system (SRS) deactivation/reactivation procedure and at the beginning of the removal procedure.

-

The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards. 

Air Bag Deactivation Switch|Locations|Page 2380 > < Air Bag Deactivation Switch|Locations|Page 2378