F 450 4WD Super Duty V10-6.8L VIN D (2004)
7. Remove the tie-rod end castellated nut.
1
Remove the cotter pin.
2
Remove the castellated nut.
8. Using the special tool, disconnect the tie-rod end from the wheel knuckle.
9. Remove the upper ball Joint castellated nut and the insert.
1
Remove the cotter pin.
2
Remove the nut.
3
Remove the insert.
10. Remove the wheel knuckle.
1
Remove the lower ball Joint nut.
2
Remove the knuckle.
