F 450 4WD Super Duty V10-6.8L VIN D (2004)
Air Bag(s) Arming and Disarming: Customer Safety Information
WARNING:
-
If the supplemental restraint system (SRS) is being serviced, the system must be deactivated and restraint system diagnostic tools must be
installed.
The air bag restraint system diagnostic tools must be removed and the air bag modules reconnected when the system is reactivated to
avoid non-deployment in a collision, resulting in possible personal injury.
-
To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
Please refer to the appropriate Component or System to determine location of the front air bag sensors.
The side air bag sensors are located at or near the base of the B-pillar.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
-
The air bag restraint system diagnostic tools must be removed and the air bag modules reconnected when the system is reactivated to
avoid non-deployment in a collision, resulting in possible personal injury.
