F 450 4WD Super Duty V10-6.8L VIN D (2004)
Steering Gear: Service and Repair
Removal and Installation
Steering Gear
Special Tools and Equipment
Special Tool(s)
Removal and Installation
NOTE: New O-ring seals must be installed any time the lines are disconnected from the steering gear.
1. Remove the air cleaner assembly.
2. Disengage the steering coupling shield from the line fitting and slide upward on the steering shaft.
3. Remove the pinch bolt.
-
Turn the steering wheel as necessary to access the bolt.
-
Make sure the steering column is locked.
