F 450 4WD Super Duty V10-6.8L VIN D (2004)
7. CAUTION: Be careful not to damage the manual control lever bore.
Remove the manual control lever shaft assembly.
8. Remove the transmission range sensor and detent lever assembly.
1
Remove the bolts.
2
Remove the transmission range sensor and detent lever assembly.
3
Disconnect the park rod from the detent lever assembly.
Installation
1. Install the transmission range sensor and detent lever assembly.
1
Connect the park rod to the detent lever assembly.
2
Install the transmission range sensor and the detent lever assembly.
3
Loosely install the bolts.
