F 450 4WD Super Duty V10-6.8L VIN D (2004)
Valve Body: Service and Repair
TorqShift
Main Control Valve Body
Special Tool(s)
Material
Removal
NOTE: The pressure switches shown in this procedure will not be applicable to all vehicle applications. Some vehicles will not have the pressure
switches or the harness installed in the valve body.
1. Remove the transmission fluid pan, gasket and filter.
2. Disconnect the solenoid body electrical connector.
1
NOTE: While lowering the solenoid body, the manual valve may fall out of the solenoid body.
