F 450 4WD Super Duty V10-6.8L VIN D (2004)
11. Tighten all the accumulator body, main control valve body, and solenoid body nuts and bolts. Tighten the bolts working from the center to the
outside.
12. CAUTION: Do not reuse the old filter and seal assembly.
CAUTION: Make sure that the pump bore is clean and the old filter seal has been removed.
NOTE: Prior to installation, lightly lubricate the fluid filter seal with clean automatic transmission fluid.
Install a new filter and seal assembly by pressing it into place.
13. NOTE: Do not discard the gasket unless damaged. This is a reusable gasket.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
