F 450 4WD Super Duty V10-6.8L VIN D (2004)
1
Remove the bearing cap bolts.
2
Remove the bearing caps.
8. To simplify the installation, fabricate two differential case retaining straps from metal stock as shown.
9. WARNING: Be careful not to allow the differential case to fall.
CAUTION: Place a wood block between the pry bar and the rear axle housing to protect the machined surface from damage.
Use the pry bar and the wood block to remove the differential case from the rear axle housing.
10. Remove the ring gear bolts.
11. CAUTION: Care should be taken not to damage the ring bolt hole threads.
