F 450 4WD Super Duty V10-6.8L VIN D (2004)
Assemble and position the following in the differential housing.
1
Position the screw (adapter for 205-SI56).
2
Position the Alignment Adapter.
3
Position the inner pinion bearing.
4
Position the Drive Pinion Depth Gauge/Aligner.
5
Position the Gauge Block (adapter for 205-SI56).
6
Position the outer pinion bearing.
7
Thread on the Drive Pinion Depth Gauge/Aligner (Handle).
9. NOTE: This step simulates pinion bearing preload.
Using a Nm (inch-pound) torque wrench, tighten the Handle to the specification.
