F 450 4WD Super Duty V10-6.8L VIN D (2004)
4. Position the brake disc shield.
5. NOTE: Apply a coat of Ford High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A meeting Ford specification
ESA-MIC198-A to the O-ring area of the wheel hub and bearing before installing the hub and bearing.
Install the wheel hub and bearing.
1
Position the wheel hub and bearing.
2
Install the four lock nuts.
Vehicle equipped with ABS
6. NOTE: These step applies only to vehicles equipped with ABS.
Connect the ABS sensor harness.
1
Position the ABS sensor harness and install the routing clips.
2
Connect the harness connector.
All vehicles
