F 450 4WD Super Duty V10-6.8L VIN D (2004)
19.
Cut 2" (5 cm) from center glass seal (Figure 9) and reapply seal to bottom of the center glass centering it from side to side (Figure 10).
20.
Center glass in carrier and push down into carrier until glass/seal bottoms out in carrier (Figure 10).
21.
Scrape away any excess urethane adhesive and function window once to verify it is operating correctly after urethane adhesive has cured for 8
hours. Customer must wait 72 hours prior to functioning the window to allowing the urethane adhesive to cure.
22.
Proceed to Step 34.
