F 450 4WD Super Duty V10-6.8L VIN D (2004)
Windshield Washer Reservoir: Service and Repair
WASHER PUMP AND RESERVOIR
REMOVAL
1. Remove the battery tray.
2. Position windshield washer fluid reservoir aside.
1
Remove the bolts.
2
Position windshield washer fluid reservoir aside.
3. Remove windshield washer fluid reservoir.
1
Disconnect the electrical connector.
2
WARNING: Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label
of washer solution container.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
Disconnect the windshield washer hose. (If equipped, disconnect the rear window washer hose).
3
Remove the windshield washer fluid reservoir.
