ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Antilock Brake System|Page 298 > < Rear Antilock Brake System|Page 296
Page 2
background image

1. CAUTION: Use care not to get dirt in the front hub. 

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.
-

Install a new front anti-lock brake sensor bolt.

Rear

Removal 

1. Disconnect the battery ground cable.
2. Raise and support the vehicle.

3. CAUTION: Clean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal to prevent fluid

Rear Antilock Brake System|Page 298 > < Rear Antilock Brake System|Page 296