F 450 4WD Super Duty V10-6.8L VIN S (1999)
Clutch Slave Cylinder: Service and Repair
Removal
1. Raise the vehicle on a hoist.
2. Remove the hydraulic line from the slave cylinder.
-
Remove and discard the roll pin.
-
Remove the hydraulic line.
3. Remove the slave cylinder.
Installation
1. Install the slave cylinder.
2. Install the hydraulic line.
-
Install the hydraulic line.
-
Install a new roll pin.
3. Lower the vehicle.
4. Bleed the hydraulic system See: Clutch Fluid/Service and Repair.