F 450 4WD Super Duty V10-6.8L VIN S (1999)
Front Door Window Regulator: Service and Repair
Power Window Regulator
REMOVAL
1. Remove the window switch.
2. Remove the door trim panel and watershield.
3. Remove the window from the window regulator.
NOTE: Do not remove the window glass from the door.
4. Tape the window glass in the full up position.
5. Disconnect the window motor electrical connector.
6. Loosen the window regulator arm retaining nuts and pull the arm from the mounting position.
7. Loosen the window regulator mounting bolts and remove the window regulator.
INSTALLATION