F 450 4WD Super Duty V10-6.8L VIN S (1999)
Windshield Washer Pump: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the battery tray.
3. Position windshield washer fluid reservoir aside.
1
Remove the bolts.
2
Position windshield washer fluid reservoir aside.
4. Remove windshield washer fluid reservoir.
1
Disconnect the electrical connector.
2
Disconnect the windshield washer hose.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
3
Remove the windshield washer fluid reservoir.