F 450 4WD Super Duty V10-6.8L VIN Z CNG (2003)
9. Disconnect the seat heater mats and the heated seat module electrical connectors. Release the electrical connectors from their cushion pan
attachments.
Power seats
10. Remove the three trim support wire screws securing the trim cover side face to the seat track riser.
11. Disconnect power seat switch electrical connector and the seat actuator motors electrical connector. Release the electrical connectors from their
cushion pan attachments.
All seats
12. Remove the four seat cushion pan attachment bolts. Lift off the seat cushion assembly.
INSTALLATION
