F 450 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Seat Cushion: Service and Repair
Disassembly and Assembly
Bench
FRONT SEAT CUSHION - BENCH
DISASSEMBLY AND ASSEMBLY
1. Remove the seat back.
2. Remove the four nuts and remove the two front seat floor supports.
3. Remove the four bolts and remove the front seat tracks.
4. Unfasten the eight seat cushion cover J-clips and remove the seat cushion cover.
5. Remove the seat cushion foam pad from the seat frame.
6. NOTE: Make sure tracks inboard and outboard are synchronize. Check track engagement and rear track spring.
To assemble, reverse the disassembly procedure.
20 Percent
FRONT SEAT CUSHION - 20 PERCENT
DISASSEMBLY
WARNING: