F 450 4WD Super Duty V10-6.8L VIN Z CNG (2003)
9. Remove the inboard, outboard and front tower cap screw covers. Remove four tower cap attachment screws.
NOTE: The inboard and outboard tower cap covers are not interchangeable.
10. Remove the screws and the bracket.
NOTE: Observe the retainer bracket orientation.
11. Using an appropriate pry tool, separate and remove the outer and front safety belt web guides.
1
Using a pin-type retainer removal tool, release the two pin-type retainers for the web guide.
2
Remove the front safety belt web guide.
3
Remove the upper safety belt web guide.
12. Remove the nut and the safety belt anchor.
