F 450 4WD Super Duty V10-6.8L VIN Z CNG (2003)
6. Release the constant tension clamp from the auxiliary cooler return hose to the remote mount fluid filter housing inlet hose at the bottom of the
radiator. Separate the hoses.
7. Remove the remaining bolts from the OTA transmission fluid cooler.
Installation
CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage
1. Position the OTA transmission fluid cooler in the vehicle and install the lower bolts.
2. Connect the OTA auxiliary cooler return hose to the remote mounted fluid filter and install the constant tension clamp.
