F 450 4WD Super Duty V10-6.8L VIN Z CNG (2003)
5. NOTE: Lubricate the O-ring with Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
To install, reverse the removal procedure.
The Axle Shaft Assembly
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly
Removal and Installation
The axle shaft removal procedure is the same for all Dana Full Floating Rear Axles. See: Dana Model 80 Full-Floating Rear Drive Axle/Removal and
Installation
The Axle Shaft Assembly
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly
Removal and Installation
The axle shaft removal procedure is the same for all Dana Full Floating Rear Axles. See: Dana Model 80 Full-Floating Rear Drive Axle/Removal and
Installation
The Axle Shaft Assembly
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly
Removal and Installation
Axle Shaft
Removal
1. NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
Loosen and remove the retaining bolts.