F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
33.Disconnect the heater hose at the coolant pump.
34.Remove the fan shroud mounting stud.
35.Install one lifting eye on the LH cylinder head.
36.CAUTION: Do not use the special tool to raise the engine. Damage to the special tool or vehicle may occur.
NOTE: The ball studs may have to be removed.
NOTE: This procedure requires a second bolt hook assembly. The tools are available through Rotunda tools with the following numbers: bolt hook
303-F070-6 handle 3O3-FO7O-8 bracket 303-F070-7 and washer 303-F070-12004.
Install the special tool.
