ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cooling System - Overheating/Coolant Loss|Page 2990 > < Cooling System - Overheating/Coolant Loss
Page 2
background image

1. Inspect the cooling system as per the Workshop Manual (WSM), Section 303-03 for external leaks, oil or fuel contamination, and/or diagnostic

trouble codes (DTCs). If external coolant leaks, oil or fuel contamination of coolant, and/or DTC(s) P0480 / P0528 are found, do not continue with
this procedure. Refer to WSM, Section 303-03, Powertrain Controls/Emissions Diagnosis (PC/ED) or any other applicable articles as needed.

2. Test the degas bottle and pressure cap for proper operation of the pressure cap and its seal to the degas bottle:

a. Do not remove the pressure cap.

Cooling System - Overheating/Coolant Loss|Page 2990 > < Cooling System - Overheating/Coolant Loss