F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
3. Remove the A/C clutch and the A/C clutch disc and hub spacer.
1
Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub spacer to force it from the compressor shaft.
2
Lift the A/C clutch disc and hub, and the A/C clutch disc and hub spacer from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.
6. Remove the A/C clutch field coil.
1
Note the location of the A/C clutch field coil electrical connector.
2
Install the special tool on the nose opening of the A/C compressor.
3
Install the special tool.
4
Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION