F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
5. Remove the A/C clutch disc and hub, and the A/C clutch disc and hub spacer.
1
Thread an 8 x 1.25 mm (0.05 in) bolt into the A/C clutch disc and hub spacer to force it from the compressor shaft.
2
Lift the A/C clutch disc and hub, and the A/C clutch disc and hub spacer from the compressor shaft.
All vehicles
6. Remove the shaft seal felt from the nose of the A/C compressor with the special tool.
7. Clean the compressor nose area.
8. Insert the tip of the special tool into one of the snap ring eyes.
9. Rotate the special tool to position the tool tip and the snap ring eye closest to the A/C compressor shaft.
