F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVAL
1. Turn the ignition switch to the OFF position.
CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
2. Disconnect the Manifold Absolute Pressure (MAP) sensor.
^
Disconnect the pressure hose.
^
Disconnect the electrical connector.
3. Remove the mounting screws and the MAP sensor.
INSTALLATION
1. To install, reverse the removal procedure.
