F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
10. Connect the safety belt retractor pretensioner electrical connector.
11. Position the safety belt retractor pretensioner and install the bolt.
NOTE:
^
Make sure that after an automatic locking retraction (ALR) retractor is installed, the retractor is not in the ALR mode of operation when
installed.
^
Prior to installation, make sure that the safety belt webbing is not twisted.
Regular cab vehicles
12. Install the safety belt retractor and pretensioner.
1
Position the safety belt retractor and pretensioner, aligning the tabs into the sheet metal.
2
Using the special tool, install the bolt.
3
Install the bolt.