F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Regular cab vehicles
12. Install the safety belt retractor and pretensioner.
1
Position the safety belt retractor and pretensioner, aligning the tabs into the sheet metal.
2
Using the special tool, install the bolt.
3
Install the bolt.
NOTE: Make sure that after an automatic locking retraction (ALR) retractor is installed the retractor is not in the ALR mode of operation when
installed.
13. Position the safety belt anchor. Using the special tool, install the bolt.
NOTE: Prior to installation, make sure that the safety belt webbing is not twisted.
