F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
1
Loosen, but do not remove the bolts.
2
Remove the front and side bolts.
3
Lower the front of the fluid pan and allow the fluid to drain.
4
Remove the remaining fluid pan bolts and the fluid pan.
3. Do not remove or install a new fluid filter.
4. Remove the torque converter drain plug cover.
5. Remove the torque converter drain plug and discard.
7.3L Diesel
6. Remove the bolts and the flexplate inspection cover.
7. Remove the torque converter drain plug and discard.
All vehicles
8. Allow the fluid to drain.
9. NOTE: If equipped with a radiator in-tank transmission fluid cooler the cooler will need to be flushed.
