F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
7. Position the skid plate and install the bolts (4x4 only).
8. Lower the vehicle.
9. CAUTION: Use only MERCON SP Transmission Fluid to service TorqShift transmissions. Mixing MERCON or MERCON V in a TorqShift
transmission may cause transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.
Fill the transmission with the specified type and quantity of transmission fluid.
10. Check for leaks.
Manual Transmission
Transmission Fluid Cooler Tubes- Manual Transmission
Removal and Installation
1. Raise and support the vehicle.
2. Remove the bolts and the skid plate (4x4 only).
3. Remove bolts and the air deflector.
4. Use a tube cutter to cut the fluid cooler tube(s) at the fluid cooler tube bracket.
