F 450 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
3. Connect the auxiliary cooler inlet hose and install the constant tension clamp.
4. Position the air deflector and install the bolts.
5. Position the skid plate and install the bolts (4x4 only).
6. Lower the vehicle.
7. Install the upper bolts by inserting a long extension and socket through the front grille and bumper.
8. CAUTION: Use only MERCON SP Transmission Fluid to service TorqShift transmissions. Mixing MERCON or MERCON V may cause
transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.
Fill the transmission with the specified type and quantity of transmission fluid.
9. Check for leaks.