F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
2
Remove the lower support-to-latch bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
5. Remove the RH latch cover.
6. Remove the latch-to-cushion frame bolt.
-
To install, tighten to 50 Nm (37 lb-ft).
7. Release the cushion trim cover J-clip.
8. Invert and remove the cushion trim cover.
9. Remove the cushion foam pad from the cushion frame.
10. To assemble, reverse the disassembly procedure.