F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet
(MSDS) if available. Failure to follow these instructions may result in serious personal injury.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash
it with water.
1. Remove the brake caliper flow bolt and discard the 2 copper washers.
^
To install, tighten to 48 Nm (35 lb-ft).
2. Disconnect the brake tube fitting from the brake flexible hose.
^
To install, tighten to 20 Nm (15 lb-ft).
3. Remove the brake flexible hose lower bracket bolt.
^
To install, tighten to 15 Nm (11 lb-ft).
4. Remove the brake flexible hose upper bracket bolt and the brake flexible hose.
^
To install, tighten to 30 Nm (22 lb-ft).
5. To install reverse the removal procedure.
^
Bleed the brake caliper.