F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
All brake flexible hoses
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
Caliper brake flexible hose
2. Remove the brake caliper flow bolt and discard the 2 copper washers.
^
To install, tighten to 35 Nm (26 lb-ft).
3. Remove the brake flexible hose bracket bolt and the brake flexible hose.
^
To install, tighten the bolt to 25 Nm (18 lb-ft).
Axle brake flexible hose
4. Disconnect the upper brake tube fitting from the brake flexible hose.
^
To install, tighten to 18 Nm (13 lb-ft).
5. Remove the retaining clip.
6. Disconnect the lower brake tube fitting from the brake flexible hose.
^
To install, tighten to 18 Nm (13 lb-ft).
7. If equipped, disconnect the axle vent hose from the bolt. Remove the brake flexible hose bolt and the brake hose.
^
To install, tighten to 30 Nm (22 lb-ft).
All brake flexible hoses
8. To install, reverse the removal procedure.
^
Bleed the brake caliper.
