F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
26. NOTE: It may be necessary to position the tensioner to install the lower bolt. Install the lower bolt last.
Position back the FEAD bracket and install the nuts and bolts.
-
Tighten to 47 Nm (35 lb-ft).
27. Position back the power steering pump and install the bolts.
-
Tighten to 25 Nm (18 lb-ft).
28. Install the retaining nut for the power steering hoses.
-
Tighten to 25 Nm (18 lb-ft).
29. Connect the high-pressure fuel injection pump electrical connector and pin-type retainer.
