F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION LOCK CYLINDER - FUNCTIONAL
Removal and Installation
1. Remove the 3 screws and the lower steering column shroud.
2. Remove the passive anti-theft system (PATS) transceiver (if equipped).
3. Remove the ignition lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Using a suitable tool, press the ignition lock cylinder release pin through the access hole while pulling out the ignition switch lock cylinder.