F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
Transmission Temperature Sensor/Switch: Service and Repair
Transmission Fluid Temperature (TFT) Sensor
Material
Removal
1. Remove the transmission fluid pan gasket and filter.
2. Disconnect the transmission fluid temperature (TFT) sensor electrical connector.
3. Press the tab, rotate the sensor counterclockwise and pull out.
4. Inspect the O-ring seal. If the O-ring seal is damaged, install a new TFT sensor.
Installation
Early Build Vehicles With Externally Mounted Remote Filter
CAUTION: Early build vehicles, those equipped with an externally mounted remote filter, are also equipped with a different design sump
filter and bottom pan. Always pair the sump filter with the correct bottom pan design, to avoid cavitation, filter cracking and transmission
damage.